Enclosures – The drive meets requirements for enclosure class IP 20/Chassis. Optional IP21/NEMA 1, IP55/NEMA 12, IP 54/NEMA12 or IP66 NEMA 4x.
Smart logic controller – The VLT® AutomationDrive features logic control functions and a sequence control based on events and actions.
Safety – The VLT® AutomationDrive comes standard with the safe stop functionality suitable for category 3 installations according to EN 954-1. This feature prevents the drive from starting unintended.
Hot plugable LCP -The Local Control Panel (LCP) can be plugged in or out during operation. Settings are easily transferred via the control panel from one drive to another or from a PC with set-up software.
Intelligent heat management – Cooling can take place in several ways to offer different sets of benefits. Forced convection cooling: A fan blows cold air through the cooling ribs of the aluminium base to remove heat. The channel is easily cleaned without touching electronics. Cold plate cooling: External cooling is possible through the back side of the aluminium base. Panel through mounting: Electronics inside cabinet – power heat sink outside cabinet. Duct cooling: Air from the control room – or from outside – cools the heatsink without contact to the electronics.

Options
Accessories – For the VLT® AutomationDrive FC 302 a wide selection of accessories is available to suit your needs. For further details see Operation Instruction.
Options – Options for bus communication, synchronisation, user programs, etc., are delivered ready to plug-and-play.
Display options – Graphical Local Control Panel (LCP 102) Numerical Local Control Panel (LCP 101) LCP Panel Mounting Kit
Application option – 24V input option for control voltage.
Fieldbus options -PROFIBUS DP V1 (MCA 101) Profisafe-Stop (MCA 103) DeviceNet (MCA 104) CAN Open (MCA 105) EtherNet IP (MCA 121) EtherCAT (MCA 124)
I/O options – General Purpose I/O (MCB 101) Encoder Input (MCB 102) Resolver Input (MCB 103) Relay Option (MCB 105) Safe PLC I/O (MCB 108) PTC Thermistor Card (MCB 112)
Motion control options – Motion Control (MCO 305) Synchronizing Control (MCO 350) Positioning Control (MCO 351) Center Winder (MCO 352)
Brake Resistors – Fittings and frames for mounting resistors
Filters – Harmonic Filter (AHF 005/010 MCE) Sine-Wave Filters (MCC 101) dU/dt filter (MCC 102)
Other accessories – IP21/NEMA 1 Kit Profibus Adaptor Sub-D9 Connector Decoupling Plate for Fieldbus Cables USB Connection cable to PC